218Changing Image Playback SettingsVertical images are rotated automatically so theyare displayed vertically on the camera’s LCDmonitor and computer instead of horizontally. Thesetting of this feature can be changed.1 Select [Auto rotate]. Under the [5] tab, select [Autorotate], then press <0>.2 Set the auto rotation. Select the desired setting, then press<0>. OnzDThe vertical image is automatically rotated on both the camera’sLCD monitor and on the personal computer. OnDThe vertical image is automatically rotated only on the personalcomputer. OffThe vertical image is not rotated.3 Auto Rotation of Vertical ImagesAuto rotation will not work with vertical images captured while auto rotationwas [Off]. They will not rotate even if you later switch it to [On] for playback. Immediately after image capture, the vertical image will not beautomatically rotated for the image review. If the vertical image is taken while the camera is pointed up or down, theimage might not be rotated automatically for playback. If he vertical image is not automatically rotated on the personalcomputer screen, it means the software you are using is unable to rotatethe image. Using the provided software is recommended.
