1) Remove the grip with a coin or similar object.2) As shown in the photo, load the battery so that its terminals face in the direction of the camera. Make surethe battery is pushed in all the way until it is locked by the orange lever3) Replace the grip securely.· When replacing the battery, first push the orange lever upward to remove the dead battery.· When using a tripod, dismount t the camera before replacing the battery.3. Checking the Battery1 ) Set the main switch to the green "Go", "A" or "(-)"mark. Thedisplay will come on at this time. If the display does not appear,confirm that the battery is loaded correctly.