105PreparationThe general procedure for sending images to a Web service is asfollows.1 Prepare a computer on which EOS Utility has beeninstalled.Use the software CD-ROM provided with the camera to install EOSUtility.2 Access Canon website from the computer and sign upas a CANON iMAGE GATEWAY member (free of charge).If you are already a member, proceed to step 3.3 Connect the camera and computer with an interfacecable.Before connection, set [Wi-Fi] to [Disable].4 Start EOS Utility on the computer, log in to CANONiMAGE GATEWAY, then configure the camera’s settingsto enable access to Web services.For details, refer to the EOS Utility instruction manual (CD-ROM).5 Connect to the wireless LAN access point from the camera(p.106).6 Send images to a Web service registered on the camera(p.120).Still photos can be sent to CANON iMAGE GATEWAY and moviescan be sent to YouTube.You can share images with your family and friends by posting a linkfor the images on Facebook* or Twitter, or by sending it to emailaddresses registered on the camera.* You can also upload images directly to Facebook.Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY,then configure the camera’s settings to enable access to Web services.For details, refer to the EOS Utility instruction manual (CD-ROM).Configuring Settings to Use Web ServicesCOPY
