60You can display the electronic level on the LCD monitor, and in theviewfinder or on the LCD panel to help correct camera tilt. Note that youcan check only the horizontal tilt and not the forward/backward tilt.1 Press the <B> button.Each time you press the <B>button, the screen display willchange.Display the electronic level.If the electronic level does notappear, set [53: z buttondisplay options] so that theelectronic level can be displayed(p.332).2 Check the camera’s tilt.The horizontal tilt is displayed in 1°increments.When the red line turns green, itindicates that the tilt is corrected.Q Displaying the Electronic LevelDisplaying the Electronic Level on the LCD MonitorHorizontal levelEven when the tilt is corrected, there may be a margin of error of ±1°.If the camera is very tilted, the electronic level’s margin of error will bebigger.With this same procedure, you can display the electronic level during LiveView shooting and before shooting a movie (p.182, 210). Note that theelectronic level cannot be displayed during movie shooting. (The electroniclevel will disappear when you start shooting a movie.)COPY
