30If you turn on the power switch and the Date/Time/Zone setting screenappears, see page 32 to set the Date/Time/Zone.<1> : The camera turns on.<2> : The camera is turned off anddoes not operate. Set to thisposition when not using thecamera.Whenever you set the power switchto <1> or <2>, sensorcleaning will be executedautomatically. (A small sound may beheard.) During the sensor cleaning,the LCD monitor will display <f>.You can still shoot during sensorcleaning by pressing the shutterbutton halfway (p.40) to stop thesensor cleaning and take a picture.If you repeatedly turn the power switch <1>/<2> at a shortinterval, the <f> icon may not be displayed. This is normal andnot a problem.To save battery power, the camera turns off automatically after 1minute of non-operation. To turn on the camera again, just press theshutter button halfway (p.40).You can set the auto power off time with [52: Auto power off](p.51).Turning on the PowerAbout the Automatic Self-Cleaning Sensor3 About Auto Power OffIf you set the power switch to <2> while an image is being recorded tothe card, [Recording...] will be displayed and the power will turn off after thecard finishes recording the image.
