wPrinting286In step 4 on page 284, select the printingeffect. When the <e> icon is displayedbrightly next to <z>, you can pressthe <B> button. You can then adjustthe printing effect. What can be adjustedor what is displayed will depend on theselection made in step 4.BrightnessThe image brightness can be adjusted.Adjust levelsWhen you select [Manual], you can changethe histogram’s distribution and adjust theimage’s brightness and contrast.With the Adjust levels screen displayed, pressthe <B> button to change the position ofthe <h>. Press the <U> key to freely adjustthe shadow level (0-127) or highlight level (128-255).kBrightenerEffective in backlit conditions that can make the subject’s face lookdark. When [On] is set, the face will be brightened for printing.Red-eye corr.Effective in flash images where the subject has red eye. When [On]is set, the red eye will be corrected for printing.e Adjustment of Printing EffectsThe [kBrightener] and [Red-eye corr.] effects will not be reflected onthe screen.When you select [Detail set.], you can adjust the [Contrast], [Saturation],[Color tone], and [Color balance]. To adjust the [Color balance], use the<S> keys. B is for blue, A for amber, M for magenta, and G for green.The image’s color balance will be corrected towards the selected color.If you select [Clear all], all the printing effect settings will be reverted totheir defaults.
