Easy Connection via WPS (PIN Mode)64[Auto setting]Configures the settings available in [Manual setting] automatically.However, this option can only be used in environments using DHCPservers, or access points or routers with DHCP server functionality,such that IP addresses and related settings are assigned andconfigured automatically.Select [OK] and press <0> to display the setting screen for thecommunication method (p.65).If an error is displayed even though the IP address and relatedsettings is set to be automatically assigned and configured, select[Manual setting].[Manual setting]If [Auto setting] results in an error, enter the IP address manually.Enter the IP address assigned to the camera when prompted for the IPaddress.Select [OK] and then select an item on the screen displayed. Whenfinished, press <0>.When entering numbers, turn the <6>dial to move the input position in theupper area and turn the <5> dial toselect the number. Press <0> to enterthe selected number. When you havefinished entering information, press the<M> button. A confirmation screenis not displayed.When you have completed setting all items, select [OK] and press<0>. The setting screen for the communication method will bedisplayed (p.65).If you are not sure what to enter, see “Checking Network Settings”(p.166), or ask the network administrator or another personknowledgeable about the network.COPY
