57ISO Speed/GainISO Speed/GainDepending on the shooting conditions you may want to adjust the brightness of the image. You can do so bychanging the ISO speed or gain value to adjust the sensitivity of the sensor.Available ISO speed and gain settings1 Settings available only when [~ Camera Setup] > [ISO/Gain] > [Extended Range] is set to [On].2 The minimum and maximum ISO speeds are available even when the 1-stop increment scale is selected.3 ISO speed required for a suitable dynamic range for Canon Log gamma. Equivalent to a gain value of 2.5 dB.4 This value is only available when [Extended Range] is set to [Off].Changing the ISO Speed or Gain Settings1 Open the ISO Speed/Gain [Select] submenu.[~ Camera Setup] > [ISO/Gain] > [Select]2 Select [ISO] or [Gain] and then press the joystick.If you selected [ISO] (the default value):3 Open the [ISO Increment] submenu to select the increment touse when adjusting the ISO speed.[~ Camera Setup] > [ISO/Gain] > [ISO Increment]4 Select [1 stop] or [1/3 stop] and then press the joystick.If you selected [Gain]:3 Open the [Gain] submenu to select the increment to use whenadjusting the gain.[~ Camera Setup] > [ISO/Gain] > [Gain]4 Select [Normal] (3-dB increment) or [Fine] (0.5-dB increment) andthen press the joystick.Operating modes:Increment Normal range Extended range 1ISO Speed1-stop increments 320 2, 400, 800, <850> 3 , 1600, 3200, 6400, 12800, 200002, 4 25600, 51200, 80000 21/3-stop increments320, 400, 500, 640, 800, <850>3 , 1000, 1250, 1600, 2000,2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 16000,2000025600, 32000, 40000, 51200,64000, 80000Gain Normal -6 dB, -3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB,21 dB, 24 dB, 27 dB, 30 dB 33 dB, 36 dB, 39 dB, 42 dBFine 0 dB to 24 dB in 0.5 dB increments –[~ Camera Setup][ISO/Gain][Select][ISO][~ Camera Setup][ISO/Gain][ISO Increment][1/3 stop][~ Camera Setup][ISO/Gain][Gain][Normal]COPY
