|
Using the Self=timerPress the <-_ _ _®> button._ Select the self=timer._ Press the <_> key or turn the<_> dial to select the self-timer,then press <0>._®: lO-sec, self4imerTheremotecontrollercanalsobeused(p.303)._32: 2-sec. self4imer (p.140)_c: lO-sec, self4imer pluscontinuous shotsPress the key to set thenumber of multiple shots (2 to 10)to be taken with the self-timer._._ Take the picture.®_Lookthroughthe viewfinder,focusthe subject,then pressthe shutterbuttoncompletely.S_.You can check the self-timer operation withthe self-timer lamp, beeper,and countdowndisplay (in seconds) on the LCD monitor._, Two seconds before the picture istaken, the self-timer lamp wiii light upand the beeper wiii sound faster.U With < _c >, the imerval between the multiple shots may be prolonged dependingon the shooting functions settings such as the image-recording quality or flash.If you do not look through the viewfinder when you press the shutterbutton, attach the eyepiece cover (p.304). If stray light enters theviewfinder when the picture is taken, it may throw off the exposure._] ¢# After taking self-timer shots, playing back the image (p.82) to checkfocus and exposure is recommended.When using the self-timer to shoot only yourself, use focus lock (p.61) onan object at about the same distance as where you will standTo cancel the self-timer after it starts, press the <_ _ _®> button103
PreviousNext |