Handy Features288You can change how long the image is displayed on the LCD monitorimmediately after shooting. If [Off] is set, the image will not be displayedimmediately after shooting. If [Hold] is set, the image review will bedisplayed up until the [Auto power off] time has elapsed.Note that during image review, if you operate any camera controls suchas pressing the shutter button halfway, the image review will end.Under the [z1] tab, select [Imagereview], then press <0>. Select thedesired setting, then press <0>.To save battery power, the camera turns off automatically after a set timeof idle operation elapses. When the camera is turned off due to autopower off, you can turn it on again by pressing the shutter button, etc.If [Disable] is set, either turn off the camera or press the <U>button to turn off the LCD monitor to save battery power.Even if [Disable] is set, the LCD monitor will turn off after thecamera is left idle for approx. 30 min. To turn on the LCD monitoragain, press the <U> button.Under the [52] tab, select [Auto poweroff], then press <0>. Select thedesired setting, then press <0>.3 Setting the Image Review Time3 Setting the Auto Power Off TimeIf [10 sec/30 sec] is set, the camera will turn off after it is left idle for approx.10 sec. When setting functions or during Live View shooting, movieshooting, image playback, etc., the auto power off time will be approx. 30sec.
