Canon EOS Rebel T2 SERIES' EOS 300X SERIES Instruction Manual

Also see for EOS 300x: Instruction manual

Canon EOS Rebel T2 SERIES' EOS 300X SERIES Instruction Manual Manual pdf 40 page image

40LAuto Exposure Bracketing (AEB)★With AEB, the camera automatically changes the exposure within the setrange (up to +/–3 stops in 1/2-stop increments) for three successive frames.1 Move the <>> arrow to the<L> icon.• Look at the LCD panel and pressthe <\> button. (∫)2 Set the desired AEB amount.• Turn the <l> dial.• Press the shutter button halfway toreturn to normal camera operation.AEB amountAEB range3 Take the picture.s The three bracketed shots will beexposed in the following sequence:standard exposure, decreasedexposure, and increased exposure.s As shown on the left, the respectivebracketing amount will be displayedas each bracketed shot is taken.• The picture will be taken in thecurrent film advance mode.• After the three AEB shots aretaken, the AEB will not be canceledautomatically. To cancel AEB, setthe AEB amount back to “ .”• During AEB shooting, the <>> arrow will appear next to the<L> icon and the AEB level <•> will be displayed. In theviewfinder, the <j> icon will blink.• In the <H> film advance mode, the camera stops shootingautomatically after taking the three AEB shots. In the <J> (singleframe) mode, press the shutter button completely three times totake the three AEB shots.• If you use the self-timer or remote control, the three AEB shotswill be taken continuously automatically.• AEB can be combined with exposure compensation.• AEB cannot be used with flash or bulb exposures.standard exposuredecreased exposureincreased exposure