32321234IntroductionContents ata GlanceDownloadingImagesCameraSettingsRemoteShootingReferencePreferencesIndexO You cannot operate the camera when the [Remote Live Viewwindow] is displayed. Pressing the Live View shooting button (thecamera’s button on the) will also display theLive View image on the camera’s LCD monitor, allowing you toview the image while operating the camera.O On, when the cursor is on the capture window’sbutton, you can operate the camera’s Mode dial to changethe shooting mode.O You can shoot by operating the capture window, even if the[Remote Live View window] is not displayed.O To perform exposure simulation (p.36) with [Remote Live Viewwindow] or enable display of histograms (p.80), set your camera’sCustom Function [Live View exposure simulation] to [Enable]. On, set [Exposuresimulation] in the menu to [Enable].O On, you can also use mirror lockup with remoteshooting (you cannot take test shots after setting mirror lockup).On , you can also use silent single shooting.O With , mirror lockup and silent single shootingcannot be performed in remote shooting.O The [Test Shooting] window appears when you click the [Testshooting] button.During flash shooting, you can take a test shot under the sameconditions as an actual shot, and adjust the white balance basedon the shot test image (p.37).O You can save shot images to both your computer and a memorycard by checkmarking [Save also on the camera’s memory card]in preferences ([Remote Shooting] window) (p.64).1D Mk IV 1Ds Mk III 1D Mk III40D REBELXSi 450D REBELXS 1000D1D Mk IV 1Ds Mk III 1D Mk III 40D REBELXSi 450DREBELXS 1000D1D Mk IV 5D Mk II 7D 60D 50D1D Mk IV 5D Mk II 7D 60D 50D REBELT3i 600DREBELT2i 550D1D Mk IV1Ds Mk III 1D Mk IIIRemote Live View Window FunctionsThese pages explain the functions available in the [Remote Live Viewwindow], including checking the camera settings and focusing whileviewing your subject on the computer screen.You can focus manually while viewing the enlarged image in the[Remote Live View window].1 Set the lens’s focus mode switch to < AF >.2 Drag [ ] to the section you want to enlarge.O You can change the software that starts up automatically whenremotely shot images are transferred to your computer from DPPto ImageBrowser or other software in preferences ([LinkedSoftware] window) (p.64).O For a list of the [Remote Live View window] functions, refer top.80.O For a list of the [Zoom View] Window functions, refer to p.81.Focusing ManuallyDragCOPY
