Canon ES30 - SELPHY Photo Printer Printer User Manual

Also see for SELPHY ES30: Software guide Software guide Software user's guide Software user's guide User guide

Contents

Canon ES30 - SELPHY Photo Printer Printer User Manual Manual pdf 98 page image

Error Messages98 TroubleshootingUnidentified Image• You attempted to play back or print an image with corrupted data, an imagerecorded in a foreign camera or data type, or an image that has been edited on acomputer. Select another image.Cannot magnify!• You attempted to magnify an image with corrupted data, an image recorded withanother camera or data type, or an image that has been edited on a computer, or amovie. Select another image.Too many marks.• Too many images have been marked with print settings. Mark 998 or less images.Cannot trim• You attempted to trim an image smaller than 640 x 480 pixels, larger than 5616 x3744 or an image with a width-to-height ratio narrower than 16:9. Select anotherimage to trim.Image not compatible• You attempted to put a speech bubble in an image smaller than 320 x 240 pixels,larger than 5616 x 3744 or an image with a width-to-height-ratio narrower than 16:9.Select another image size that allows speech bubbles to be set.Device Not Supported• This displays when you attempt to connect an unsupported USB device, e.g. USBmemory. Disconnect the USB device. If the message returns, turn the printer offand back on.Device Not Supported (HUB)• You attempted to connect an unsupported USB connector, e.g. a USB hub.Disconnect the USB hub.Data Error• If you are connecting via Bluetooth, try to establish the connection again. If themessage keeps reappearing several times, Bluetooth incompatibility or corrupteddata may be the problem. Select a different image.COPY