1 ATTACHING THE LENS1 Attaching the LensTo remove the body cap, turn it counterclockwise until it stops and pull it off. Toreattach, align the red dot on the cap with the camera’s red dot. Then lightly pushthe cap in and turn it fully clockwise.Turn the rear lens cap in the direction of the arrow until it stops and pull it off. Toreattach, align the arrow on the cap with the lens’ red dot. Then lightly push thecap in and turn it fully clockwise.To mount the lens, align its red positioning point with the camera’s red dot andturn the lens in the direction of the arrow until it stops and the lens release buttonpops out. To remove the lens, turn it counterclockwise while pressing the lens re-lease button.CAUTIONDo not mount the lens if the red dot inside the camera mount and the red lineon the stop-down slide are showing. In this case, push in the stopdown slide so thatit locks in the normal (retracted) position and these warning marks can no longerbe seen.4
