Canon FAX-B820 Service Manual

Also see for FAX-B820: User guide User guide

Contents

[Bit 6]It is possible to choose to send out CNG signal when manual TX is set. If the document is sent manually to themachine with [FAX/TEL AUTO SW] mode selected.[Bit 7]It is possible to send out CED signal when manual RX is set.Even if manual RX is set, please choose to send out CED signal when the other party does not start transmittingthe document.#1 SSSWSW05 (Service Soft Switch05; Standard Feature setting)Bit Function 1 00 Not in use1 Not in use2 Not in use3 Not in use4 Length of Print Media indicated by DIS signal A4/B4 size Any size5 Indication of LTR/Legal by DIS signal No Yes *6 Sending ECM No Yes *7 Sending ECM No Yes *[Bit 4]It is possible to select A4/B4 as the print media length to be indicated by DIS signal.If the machine is to receive a banner paper-size document, be sure to select A4/B4 as the media size to receive itdividing it into 2 pages*When selecting A4/B4, a DIS signal notifying that the A4 or B4 recording papers are available issent to the transmitting machine. After receiving the DIS signal, the transmitting machine dividesthe long-size document into A4 or B4 size, and then sends the document to the receiving machine.Some models of transmitting machines may not divide a long-size document.[Bit 6]It is possible to select ECM TX.If ECM TX is not set, ECM TX is disabled.[Bit 7]It is possible to select ECM RX.If ECM RX is not set, ECM RX is disabled.1-32