Canon HR10 - Camcorder - 1080i Instruction Manual

Also see for VIXIA HR10: Software guide Instruction manual Brochure Instruction manual Instruction manual

Contents

25Before Downloading Still ImagesWindowsBefore Downloading Still ImagesConnecting the Camcorder to a Computer Be sure to install the Digital Video Software before you connect thecamcorder to the computer. Make sure the camcorder is being powered using the power adapter beforeconnecting it to a computer. Connect the USB cable directly to one of the computer’s main USB ports.The interface may not function correctly if the camcorder is connected via aUSB hub. The connection may not operate correctly if you are using other USBdevices, excluding USB mice or keyboards, at the same time. If this occurs,disconnect the other devices from the computer and try reconnecting thecamcorder. Do not connect two or more camcorders to the computer. The camcordersmay not operate normally. Never allow the computer to go into standby (sleep) mode while acamcorder is connected via the USB interface. Refer to your computer manual for the location of the computer’s USB ports. See your camcorder instruction manual for connecting instructions.1 Insert a memory card containing images into the camcorder.2 Connect the power adapter to the camcorder.3 Turn the POWER switch to ON and change the camcordermode to PLAY by sliding the POWER switch down.4 Move the / switch to .Wait until the card access indicator stops flashing.5 Attach the supplied USB cable to the computer’s USB portand the camcorder’s USB Terminal.• The first time you connect the camcorder to the computer:- Windows 2000: Installation of the DV TWAIN Driver starts. If the “Digitalsignature not found” message appears, click [Yes].- If you are prompted to restart the computer, restart the computer.• A window appears allowing you to select an application program to start.