63333 Hold the ink tank as shown in thediagram and remove the protective cap.4444 Insert the yellow ink tank into the right-hand slot. Press the top until it clicksinto place.5555 Use the same procedure to install theother ink tanks in their appropriate slots.Check the labels to make sure that each tank is in thecorrect position.6666 Close the front cover.Wait until the POWER lamp remains fully lit (about 60seconds).• Do not squeeze the sides ofthe ink tanks as this maycause the ink to leak out andstain your clothes and hands.• Do not touch the ink port.• Do not attempt to reattach theprotective cap once it hasbeen removed.• Only install the ink tanks in the positions specifiedby the labels.• If ink tanks are not installed in the right position,colors will not be printed correctly. Immediatelyreinstall the tank in the correct position and carryout print head cleaning. For details, refer to theUser’s Guide.protective capink portBlack Cyan Magenta Yellow