Canon IMAGECLASS MF8180C Network Manual

Also see for Color imageCLASS 8180c: Basic guide Remote ui guide Quick start guide Facsimile guide Software guide

Protocol Settings2-10Specifying the Network Settings2Protocol SettingsYou can specify the machine’s protocol settings on the computer by using any ofthe following software. Specify the settings using the easiest method.• A web browser (Remote UI)• NetSpot Console (via a web browser)IMPORTANT• If you want to use NetSpot Console or the Remote UI, a web browser is required.• To use NetSpot Console, a computer on the network must have NetSpot Consoleinstalled. Install NetSpot Console in one computer on the network. For more detailsabout NetSpot Console, see the NetSpot Console User's Guide (PDF manual), or theNetSpot Console readme file.• To specify the protocol settings using NetSpot Console, you must log in as Administrator.For instructions on how to use NetSpot Console, see the online help for NetSpotConsole.NOTE• If you change the IP (Internet Protocol) address on the web browser (Remote UI), thechange will not be reflected on the display of the machine. The change become effectiveafter the machine is restarted.You can confirm the change of the IP address by checking underthe menu, or by printing the USER DATA LIST.• The utility software of the NetSpot Console is not included in the User Software CD. Touse the NetSpot Console, please download it from the Canon website.Settings Using a Web Browser (Remote UI)NOTEMake sure that in is set to before using theRemote UI. (See "HTTP," on p. 2-23.)1 Start the web browser ➞ enter the URL below in [Location] or[Address] ➞ press [Enter] on the keyboard.http:///Input Example : http://192.168.203.42/