Additional Functions Menu SettingsCommon Settings4-4 Additional Functions Menu SettingsSetting Item DescriptionsSTACK BYPASS SIZE Selects the size of paper in the stack bypass.OFF Select when you set to FREE SIZE or SET ON LOADING.FREE SIZE: Free size (default)SET ON LOADING: Select when specifying the paper size each timeyou use the stack bypass. The paper or envelope type can also bespecified in SET ON LOADING.ON LTR, STMT, CUSTOM PAPER SIZE (length and width can be specifiedin millimeters), A4, B5, A5, LGLDRAWER PAPER SIZE Select the size of paper loaded in the paper drawer.LTR/LGL (default), FOLIO, FOOLSCAP, A4PRINT EXPOSURE The exposure can be adjusted to one of five levels.(Default is center.)BYPASS PAPERTYPE Select the paper type.PLAIN PAPER (default), TRACING PAPER, TRANSPARENCY, SPECIALPAPER 1, SPECIAL PAPER 2If you select a paper type other than PLAIN PAPER and select the stackbypass with [Paper Select], A will appear on the standby display.COPY POWER LEVEL Sets a copy power level.HIGH Sets a high copy power level. Select this setting when making copies onthick paper or when the humidity is high.(If you set this to HIGH and select the stack bypass with [Paper Select],# will appear on the standby display.)NORMAL Sets a normal copy power level. (This is the default.)LOW Sets a low copy power level. Select this setting to ensure correctcopying when making copies in Photo mode after making a largenumber of copies in high-temperature and high-humidity conditions. Inother modes, copies may not be reproduced clearly.(If you set this to LOW, # will appear on the standby display.)4Customizing Settings
