Canon IR 2420 Network Manual

Also see for imageRUNNER 2420: Copying guide Reference guide Trouble error codes list Easy operation guide Remote guide

Contents

Setting Up the Machine Using the Control Panel 3-9Setting Up the Machine for Your Network Environment3Startup Time SettingsWhen you connect the machine to a switching hub, the machine may not be able toconnect to the network even if your network settings are set correctly.This occurs because the spanning tree process performed between switching hubsprevents them from communicating with each other immediately after the machineconnects to the hub.In this case, use the following procedure to delay the start of communication.1 Press (Additional Functions) ➞ use [ ] or [ ] to select ➞ press [OK].For help, see the screen shots in steps 1 and 2 in “Protocol Settings,” on p. 3-2.2 Use [ ] or [ ] to select ➞ press [OK].3 Use [ ] or [ ] to select ➞ press [OK].4 Using [ ] or [ ], or -(numeric keys), set the timeperiod required for the machine todelay the startup of networkcommunications ➞ press [OK].The value for can be setfrom 0 to 300 Sec.Device Info SettingsDept. ID ManagementUser ID ManagementNetwork SettingsSystem SettingsTCP/IP SettingsSNMP SettingsEthernet DriverStartup Time Set.Network Settings60 sec(0-300)Startup Time Settings