Basic Copying11-6 Flow of Copy OperationsNOTEā¢ If there is a current job, the machine scans the original, and waits to print it. Printing starts when the current job iscompleted.ā¢ When scanning is completed, remove the original.ā¢ If you have set the Department ID Management, press . (See the Reference Guide.)ā¢ If the optional Card Reader is attached, remove the control card. (See the Reference Guide.)ā When you want to reserve a copy job while the machine is printing:ā¼ Place the original and press (start). (See āReserving a Copy Job While Printing,ā onp. 1-23.)ā When you want to cancel a copy job:ā¼ Press (Stop).ā¼ Press or to select or .NOTEā¢ After you have pressed (Stop), several copies may be output from the machine.ā¢ You can also stop a copy job in the Monitor screen. (See the Reference Guide.)ā When you want to interrupt a copy job:ā¼ To interrupt a copy job when you need to make priority copies, press (Interrupt).For instructions on explaining how to interrupt a copy job, see āInterrupting the Current Jobto Make Priority Copies (Interrupt Mode),ā on p. 1-25.CANCEL COPYING?< YES NO >ID
