Canon IR2020 Copying Manual

Also see for iR2016 Series: User guide Easy operation guide Service manual Service manual User guide

Contents

Different Size Originals2-18Special Copying Features2Different Size OriginalsThe Different Size Originals mode enables you to copy different size originals withthe same or different width together.IMPORTANT• If your machine is the iR2016 model, the Feeder (DADF-P1) should be attached to usethis mode.• If paper of the same size as the original is not loaded in the paper drawer or stackbypass, the machine automatically reduces, enlarges, or separates the copied image tofit the paper loaded in the paper drawer or stack bypass.• The Different Size Originals mode cannot be used with the following modes:- Two-Page Separation- 2 on 1 Combination- Original Frame Erase- Book Frame Erase- Binding Hole Erase- Book to 2-Sided• Make sure that the different size originals are of the same weight (paper type).• Set different size originals in the following combinations. Other combinations maydamage the originals.- A3 and A4 or A4R and A5.• Align the top edge of the originals with the back edge of the feeder or the platen glass ifyou are placing originals with different widths. (“Width” refers to the vertical measurementof the paper from the front of the machine to the back of the machine when the paper isplaced in the feeder or the platen glass.)• If you place originals with different widths into the feeder, the originals may move slightlywhen fed to the platen glass. As a result, the images may be scanned as slanted.• If the Different Size Originals mode is set, the scanning speed may be slower thannormal.• If the Different Size Originals mode is set in combination with the Auto Paper Selectionmode, Auto Orientation is not performed.