97Before UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto ModeOther ShootingModesP ModePlayback ModeSetting MenuAccessoriesAppendixIndexDisabling Eye-Fi TransferConfigure the setting as follows to disable Eye-Fi transfer by the card,if necessary.zz Press the <n> button, choose[Eye-Fi Settings] on the [3] tab, and thenpress the <m> button.zz Choose [Eye-Fi trans.], and then choose[Disable].• [Eye-Fi Settings] is not shown unless an Eye-Fi card is in thecamera with its write-protect tab in the unlocked position. For thisreason, you cannot change settings for an inserted Eye-Fi card ifthe write-protect tab is in the locked position.Connection status of Eye-Fi cards in the camera can be checked on theshooting screen (in regular information display mode) or playback screen (insimple information display mode).(Gray) Not connected Interrupted(Blinking white) Connecting Not communicating(White) Connected Error acquiring Eye-Fi card information* 2(Animated) Transfer in progress* 1*1 Power saving (=20) on the camera is temporarily disabled during image transfer.*2 Restart the camera. Repeated display of this icon may indicate a problem with thecard.Images labeled with a [ ] icon have been transferred.Checking Connection InformationCheck the access point SSID used by the Eye-Fi card or the connectionstatus, as needed.zz Press the <n> button, choose[Eye-Fi Settings] on the [3] tab, and thenpress the <m> button.zz Choose [Connection info], and then pressthe <m> button.zz The connection information screen isdisplayed.
