4Initial PreparationsInserting the Battery Pack and Memory Card1 Open the cover. Slide the cover ( ) and open it ( ).2 Insert the battery pack. While pressing the battery lock in thedirection of the arrow, insert the batterypack as shown and push it in until it clicksinto the locked position. To remove the battery pack, press thebattery lock in the direction of the arrow.3 Check the card’s write-protecttab and insert the memory card. Recording is not possible on memorycards with a write-protect tab when thetab is in the locked position. Slide the tabto the unlocked position. Insert the memory card facing as shownuntil it clicks into the locked position. To remove the memory card, push it inuntil you feel a click, and then slowlyrelease it.4 Close the cover. Lower the cover ( ) and hold it down asyou slide it, until it clicks into the closedposition ( ). If the cover will not close, make sure youinserted the battery pack facing the rightway in step 2.Terminals Battery LockTerminals