Canon ImageCLASS MF3240 Series Starter Manual

Also see for ImageCLASS MF3240 Series: Basic guide Basic guide Advanced guide Software guide

Contents

13Connect the Power Cord Set the Date and Time1 2 ● Entering Information– Numeric keys: Enters letters andnumbers.– [ ] or [ ]: Move the cursorposition.– [Clear]: Deletes the character atthe cursor position, or the entireentry if held for more than onesecond.Connect the power cord into the rear socket and the walloutlet.The machine enters standby mode. 1 Press [AdditionalFunctions].2 Use [ ] or [ ] toselect <3 TIMERSETTINGS>, then press[OK].3 Use [ ] or [ ] toselect <2 DATE&TIMESETTING>, then press[OK].What if...● is displayed:Make sure that the front cover is closed properly.(See “Install Toner Cartridge,” on p. 5.)● is displayed:Make sure that the toner cartridge is installed properly.(See “Install Toner Cartridge,” on p. 5.)● is displayed:Make sure that paper is loaded in the machine. (See “Set Up the Paper Cassette and Load Paper,” on p. 7.)4 Use the numeric keys toenter the time (in 24-hourformat) and date (year/month/day), then press[OK].5 Press [Stop/Reset] toreturn to standby mode.T E X T 11 0 0 % L T REx.[OK] Numeric Keys[ ][ ] [AdditionalFunctions][Clear][FAX][Stop/Reset]NOTEThere is no power switch.Ex.D A T E & T I M E S E T T I N G1 1 : 1 9 1 2 3 1 ´ 0 514