Canon ImagePrograf iPF840 series Basic Manual

Also see for imagePROGRAFi iPF840 series: Setup guide User guide Quick guide

Contents

PaprTypeMismatchPaprTypeMismatchCause Corrective ActionWhen Detect Mismatch in the ControlPanel menu is set to Pause, the type ofpaper loaded does not match the typespecified in the printer driver.Follow these steps to ensure the paper type matches on the printer and in the printerdriver.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Change the paper type setting in the printer driver to the type loaded in the printerand try printing again.Follow these steps to ensure the paper type matches on the printer and in the printerdriver.1. Press ▲ or ▼ to select Change Paper, and then press the OK button.2. Replace the loaded paper with paper of the type and size you have specified in theprinter driver.(See "Loading and Printing on Rolls.") ➔ User's Guide(See "Loading and Printing on Sheets.") ➔ User's GuidePress ▲ or ▼ to select Print, and then press the OK button to resume printing.However, note that this error may cause paper jams and affect the printing quality.The paper is too small.The paper is too small.Cause Corrective ActionWhen Detect Mismatch in the ControlPanel menu is set to Pause or Hold Job,paper smaller than the size specified in theprinter driver is loaded.Press ▲ or ▼ to select Print, and then press the OK button to resume printing.However, note that this error may cause paper jams and affect the printing quality.Adjust the paper size setting in the printer driver to match the size loaded in the print-er as follows.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Change the paper size setting in the printer driver to the size loaded in the printerand try printing again.Replace the loaded paper with paper of a size that matches the size setting in theprinter driver as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stopprinting.2. Replace the loaded paper to match the settings in the printer driver and try printingagain.(See "Loading and Printing on Rolls.") ➔ User's Guide(See "Loading and Printing on Sheets.") ➔ User's GuideWhen Detect Mismatch in the ControlPanel menu is set to Warning, paper small-er than the size specified in the printer driv-er is loaded.You can continue to print, but note that this error may cause problems in the printingresults.The paper is too small.The paper is too small."Replace paper with A4/LTR (vertical) or larger"Cause Corrective ActionThe loaded paper is too small.(When you have attempted to print a testprint sheet or other printer status informa-tion.)Replace the paper with paper of A4/Letter (vertical) size or larger as follows.1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.(See "Removing Sheets.") ➔ P.282. Switch to paper A4/Letter (vertical) or larger.(See "Loading and Printing on Sheets.") ➔ User's GuideThe printer will resume printing.PaprTypeMismatch iPF840 SeriesBasic GuideError Message Messages regarding paper126