Canon ImageRunner Series Getting Started

Also see for imageRUNNER 1643i: Getting started Getting started

Contents

18EnAppendix If the operating noise concerns youDepending on the use environment andoperating mode, if the operating noise is ofconcern, it is recommended that the machine beInstalled in a place other than the office.Moving the MachineIf you intend to move the machine, even to alocation on the same floor of your building, contactyour local authorized Canon dealer beforehand. Donot attempt to move the machine yourself.Power SupplyWARNING• Use only a power supply that meets thespecified voltage requirements. Failure to doso may result in a fire or electrical shock.• The machine must be connected to asocket-outlet with grounding connection bythe provided power cord.• Do not use power cords other than the oneprovided, as this may result in a fire or electricalshock.• The provided power cord is intended for usewith this machine. Do not connect the powercord to other devices.• Do not modify, pull, forcibly bend, or performany other act that may damage the powercord. Do not place heavy objects on the powercord. Damaging the power cord may result ina fire or electrical shock.• Do not plug in or unplug the power plug withwet hands, as this may result in an electricalshock.• Do not use extension cords or multi-plugpower strips with the machine. Doing so mayresult in a fire or electrical shock.• Do not wrap the power cord or tie it in a knot,as this may result in a fire or electrical shock.• Insert the power plug completely into the ACpower outlet. Failure to do so may result in afire or electrical shock.• Remove the power plug completely from theAC power outlet during a thunder storm.Failure to do so may result in a fire, electricalshock, or damage to the machine.• Make sure that the power supply for themachine is safe, and has a steady voltage.• Keep the power cord away from a heat source;failure to do this may cause the power cordcoating to melt, resulting in a fire or electricalshock.Avoid the following situations:If excessive stress is applied to the connectionpart of the power cord, it may damage thepower cord or the wires inside the machine maydisconnect. This could result in a fire.• Connecting and disconnecting the powercord frequently.• Tripping over the power cord.• The power cord is bent near the connectionpart, and continuous stress is being applied tothe power outlet or the connection part.• Applying excessive force on the power plug.CAUTIONInstall this machine near the power outlet andleave sufficient space around the power plug sothat it can be unplugged easily in an emergency.IMPORTANTWhen connecting power• Do not connect the power cord to anuninterruptible power source. Doing so mayresult in malfunction of or damage to themachine at power failure.• If you plug this machine into an AC poweroutlet with multiple sockets, do not use theremaining sockets to connect other devices.• Do not connect the power cord to the auxiliaryAC power outlet on a computer.• A location subject to dramatic changes intemperature or humidity• A location near equipment that generatesmagnetic or electromagnetic waves• A laboratory or location where chemicalreactions occur• A location exposed to corrosive or toxic gases• A location that may warp from the weight ofthe machine or where the machine is liable tosink (a carpet, etc.)Avoid poorly ventilated locationsThis machine generates a slight amount of ozoneand other emissions during normal use. Theseemissions are not harmful to health. However,they may be noticeable during extended use orlong production runs in poorly ventilated rooms.To maintain a comfortable working environment,it is recommended that the room where themachine operates be appropriately ventilated.Also avoid locations where people would beexposed to emissions from the machine.Do not install in a location wherecondensation occursWater droplets (condensation) may form insidethe machine when the room where the machineis installed is heated rapidly, and when themachine is moved from a cool or dry location toa hot or humid location. Using the machineunder these conditions may result in paper jams,poor print quality, or damage to the machine. Letthe machine adjust to the ambient temperatureand humidity for at least 2 hours before use.Avoid installing the machine near computersor other precision electronic equipment.Electrical interference and vibrations generated bythe machine while printing can adversely affectthe operation of such equipment.Avoid installing the machine near televisions,radios, or similar electronic equipment.The machine might interfere with sound andpicture signal reception.Insert the power plug into a dedicated poweroutlet, and maintain as much space as possiblebetween the machine and other electronicequipment.In altitudes of above sea level 3,000 m or higherMachines with a hard disk may not operateproperly when used at high altitudes of about3,000 meters above sea level, or higher.Connecting the Telephone LineThis machine conforms to a analog telephoneline standard. The machine can be connected tothe public switched telephone network (PSTN)only. If you connect the machine to a digitaltelephone line or a dedicated telephone line, itmight impede proper operation of the machineand could be the cause of damage. Make sure toconfirm a type of telephone line beforeconnecting the machine. Contact your opticalfiber line or IP telephone line service providers ifyou want to connect the machine to thosetelephone lines.When using wireless LAN• Install the machine at a distance of 50 metersor less from the wireless LAN router.• As far as possible, install in a location wherecommunication is not blocked by interveningobjects. The signal may be degraded whenpassing through walls or floors.• Keep the machine as far as possible fromdigital cordless phones, microwave ovens, orother equipment that emits radio waves.• Do not use near medical equipment. Radiowaves emitted from this machine mayinterfere with medical equipment, which mayresult in malfunctions and accidents.Important SafetyInstructionsThis chapter describes important safetyinstructions for the prevention of injury to users ofthis machine and others, and damage to property.Read this chapter before using the machine, andfollow the instructions to use the machine properly.Do not perform any operations not described inthis manual. Canon will not be responsible for anydamages resulting from operations not describedin this manual, improper use, or repair or changesnot performed by Canon or a third partyauthorized by Canon. Improper operation or use ofthis machine could result in personal injury and/ordamage requiring extensive repair that may not becovered under your Limited Warranty.InstallationTo use this machine safely and comfortably,carefully read the following precautions andinstall the machine in an appropriate location.WARNINGDo not install in a location that may result in afire or electrical shock• A location where the ventilation slots areblocked (too close to walls, beds, sofas, rugs, orsimilar objects)• A damp or dusty location• A location exposed to direct sunlight or outdoors• A location subject to high temperatures• A location exposed to open flames• Near alcohol, paint thinners or otherflammable substancesOther warnings• Do not connect unapproved cables to thismachine. Doing so may result in a fire orelectrical shock.• Do not place necklaces and other metalobjects or containers filled with liquid on themachine. If foreign substances come in contactwith electrical parts inside the machine, it mayresult in a fire or electrical shock.• If any foreign substance falls into this machine,unplug the power plug from the AC power outletand contact your local authorized Canon dealer.CAUTIONDo not install in the following locationsThe machine may drop or fall, resulting in injury.• An unstable location• A location exposed to vibrationsIMPORTANTDo not install in the following locationsDoing so may result in damage to the machine.• A location subject to temperature andhumidity extremes, whether low or highWARNINGIndicates a warning concerning operationsthat may lead to death or injury to persons ifnot performed correctly. To use the machinesafely, always pay attention to these warnings.CAUTIONIndicates a caution concerning operationsthat may lead to injury to persons if notperformed correctly. To use the machinesafely, always pay attention to these cautions.IMPORTANTIndicates operational requirements andrestrictions. Be sure to read these itemscarefully to operate the machine correctly andavoid damage to the machine or property.