Canon KP-36IP - Powershot A470 & Selphy CP780 Printer User Manual

Also see for CNSD770ISSB2 - Powershot SD770 IS 10.0MP 3x Optical Zoom Digital Camera BigVALUEInc: Software guide Software user's guide Software guide User guide

Contents

Canon KP-36IP - Powershot A470 & Selphy CP780 Printer User Manual Manual pdf 52 page image

50List of MessagesThe following messages may appear on the camera LCD monitor ifan error occurs during a camera and printer connection.(Depending on the printer, some messages may not appear.)• Please refer to the printer’s user guide for the appropriateremedies.: Printing restarts if you select [Continue] and press theFUNC./SET button. For the remedies to other messagesthat might appear, refer to your printer’s user guide.No Paper Set paper in the printer, then execute printing again.Paper JamThe paper jammed during printing. Select [Stop] tocancel printing. Remove the jammed paper, resetsome other paper in the printer, then print again.Paper ErrorEither the paper is not set correctly in the printer, orpaper that differs from the setting has been set in theprinter. Confirm the type and size of paper being used.Also open the paper output tray if it is closed.In addition, close the CD-R tray guide when it is open.No InkInk Cassete ErrorThe ink tank has run out of ink or there is no ink tank inthe printer. The number of times that the printer’s errorlamp blinks, and the error message displayed, willindicate the appropriate remedy for the error. Pleaserefer to the printer’s user guide for the remedy.Low ink levelThe ink tank needs to be replaced soon. Prepare anew ink tank. If you select [Continue] in the errorscreen, you can restart printing.Ink absorber fullYou can restart printing if you select [Continue] in theerror screen. Please request replacement of the inkabsorber from your nearest Canon Customer Supportcenter listed in the contact list provided with the printeror in the user guide. The ink absorber cannot bereplaced by the user.Ink ErrorThere is a problem with the ink. If the printer’s errorlamp is blinking and an error message is displayed,please refer to the printer’s user guide to ascertain theproblem and its remedy.COPY