Turning the Printer ON/OFF2-38Installing the Printer21 Press " " of the power switch on the printer.Power Saving (Sleep Mode)You can reduce power consumption efficiently by using the sleep mode when theprinter is idle or not in use. Use the sleep mode using the following procedure.IMPORTANT• While " " of the power switch located on the back of the printer is pressed, the powerconsumption is 0 W.• Since calibration is not performed automatically during the sleep state, you may notobtain appropriate printout results when printing immediately after the sleep state isreleased. In this case, perform calibration manually "Calibrating the Printer" (See p.6-16).NOTE• You can select [5], [10], [15], [30], [60], [90], [120], [150], or [180] minutes for [Time toEnter Sleep Mode]. The default value is [30] minutes. You can also configure the printernot to enter the sleep mode.• The sleep mode is cleared in the following circumstances:- Printing is performed- Calibration is performed- Cleaning is performed1 Display the Printer Status Window.For details on methods for displaying the Printer Status Window, see "Displayingthe Printer Status Window," on p. 5-92.
