Printing Problems0YSF-06HSeeCommon Problems(P. 541)also.Printing results are not satisfactory. Paper creases or curls.When You Cannot Print Properly(P. 547)You cannot print.Check the Following.●Is the [] indicator lit or blinking? In this case, printing is in progress. Please wait for a while. If theremaining data is not printed even after a while, select Reset Menu(P. 498)●Is() lit? If it is not lit, press() to set the machine to online.Online key(P. 25)●Can you print by Status Print or Network Status Print? If you can print, the machine has no problem. Checktheconfigurednetwork and computer settings.Printing Reports and Lists(P. 586)●Can you print a Windows test page? If you can print a Windows test page, there is no problem with themachine or the printer driver. Check the print settings of your application.Printing a Test Page in Windows(P. 662)If the problems persist, check the items that suit your operational environment.Wired LAN connection●Have you selected the correct port?Checking the Printer Port(P. 664)If the correct port is selected, click[ConfigurePort] of the [Ports] tab to check that the settingspecifiedfor[Printer Name or IP Address] matches thatconfiguredin the machine.If there is no port to use or the IP address of the machine is changed, generate a port by following theprocedure for changing the standard TCP/IP port described in the Printer Driver Installation Guide.●Is the computer communication restricted byfirewalls?Use the operation panel to set to.Restricting Communication by Using Firewalls(P. 267)Address Filter(P. 395)●Disable security software and other resident software.●ByfollowingtheprocedureforchangingthestandardTCP/IPportdescribedinthePrinterDriverInstallation Guide, change the print protocol to LPD and enable LRP Byte Counting.●Reinstall the printer driver in accordance with the Printer Driver Installation Guide.●Can you print from other computers on the network? If you also cannot print from other computers,contact your local authorized Canon dealer or the Canon help line.If you are using the SMB network●Are the SMB settingsconfiguredcorrectly? In particular, check that the DHCP server and WINS server areconnected properly if you are using them.ConfiguringSMB(P. 245)Troubleshooting545
