Tu[ning Qff _b_ Image S_biJize[The image stabilizer compensates for camcorder shake even at full telephoto. It tries tocompensate for horizontal movements; therefore, you may decide to turn it off when youmount the camcorder on a tripod.°°"° ]L J([_38) CAMERA SETUP _ IMG STAB((_))...ONOpen the menu and select [CAMERA SETUP]. Select [IMG STAB((_))], setit to [OFF] and close the menu."((t))" disappears.O The image stabilizer cannot be turned off when the program selector is set toEASY.O The image stabilizer is designed to compensate a normal degree of camcordershake.O The image stabilizer might not be as effective when using the night modes.a deThe demonstration mode displays the camcorder's main features. It starts automaticallywhen you leave the camcorder turned on without loading a recording media for more than5 minutes. However, you can set the camcorder not to start the demonstration mode.MENU DISPLAY SETUP/_([_ 38) DEMO MODE ....ON JOpen the menu and select [DISPLAY SETUP/_ ]. Select [DEMO MODE],set it to [OFF] and close the menu.To cancel the demo mode once it has begun, press any button, turn off thecamcorder or load a recording media.78