3. SERVICE (MECHANICAL DISASSEMBLES)Mechanical disassemble should be made by following procedures in numerical order.The following steps show the basic procedures, therefore unnecessary step may beignored.3.1 Cabinet Top Removal1. Remove 5 screws A and 2 screws B,loosen 2 screws C, and remove thecabinet top.Part 2: Repair Information2-5The parts and screws should be placed exactly in the same position asthe original, otherwise it may cause loss of performance and productsafety.CAUTIONFig. 2-5When only the front cabinettop is removed, screws Aneed not be removed.Remove 2 screws B and thefront lens cover to removethe front cabinet top.CAUTIONCBAAAABAC
