Chapter 33-24F-3-1493.3.1.7 Removing the top cover 0012-16111) Free the 2 claws [1], and remove the top cover [2].- 2 screws [3]F-3-1503.3.1.8 Removing the Laser/Scanner Unit 0012-16131) Remove the laser scanner unit [1]. (For better visibility, the covers, etc.have been removed in the illustration.)- 1 flat cable [2]- 1 connector [3]- 4 screws [4]When removing the laser scanner unit, take care not to lose the groundingplate [5].F-3-1513.4 IMAGE FORMATION SYSTEM3.4.1 Transfer Charging Roller3.4.1.1 Removing the Transfer Charging Roller 0012-16331) Open the front cover.2) Hold the 2 claws [1] on the right side of the roller, lifting them up.3) Slide the transfer charging roller [2] by sliding it to the right.F-3-1523.5 PICKUP AND FEEDING SYSTEM3.5.1 Cassette Pickup Roller3.5.1.1 Removing the Cassette 0012-16351) Remove the cassette by holding the cassette handle.3.5.1.2 Removing the front cover 0012-16361) Open the front cover [1] and remove the arm claws [2] to disengage theconnection.2) Remove the shafts on both sides [3] while warping the shaft arms inside,and remove the front cover.F-3-153[1] [2][2][3][1] [1][3][1][2][4][5][2] [1][1][3][3][2]
