Troubleshooting159Cannot play the movies in the built-in memory Initialize only using the camcorder- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memorywith this camcorder (0 35).Cannot play the movies on this memory card Initialize only using the camcorder- The memory card in the camcorder was initialized using a computer. Initialize the memory cardwith this camcorder (0 35).Cannot play the movies on this memory card- Movies cannot be played back from a 64 MB or smaller memory card. Use a recommendedmemory card (0 31).Cannot record- You cannot capture video snapshot scenes from scenes recorded or edited using anotherdevice.- There is a problem with the memory. If this message appears often without apparent reason,contact a Canon Service Center.Cannot record Cannot access the built-in memory- There is a problem with the built-in memory. Save your recordings (0 127) and initialize thebuilt-in memory using the [Complete Initialization] option (0 35). If the problem persists,contact a Canon Service Center.Cannot record Check the memory card- There is a problem with the memory card. Save your recordings (0 127) and initialize thememory card using the [Complete Initialization] option (0 35). If the problem persists, use adifferent memory card.Cannot record movies in the built-in memory Initialize only using the camcorder- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memorywith this camcorder (0 35).Cannot record movies on this memory card Initialize only using the camcorder- The memory card in the camcorder was initialized using a computer. Initialize the memory cardwith this camcorder (0 35).Cannot record movies on this memory card- Movies cannot be recorded on a 64 MB or smaller memory card. Use a recommended memorycard (0 31).Cannot save the canvas- Cannot save your [Pens and Stamps] drawings on the memory. Save your recordings (0 127)and initialize the memory (0 35).Change the battery pack- Battery pack is exhausted. Replace or charge the battery pack.Check the memory card- Cannot access the memory card. Check the memory card and make sure it is insertedcorrectly.- A memory card error occurred. The camcorder cannot record or display the image. Tryremoving and reinserting the memory card, or use a different memory card.- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card(0 31).- If after the message disappears, 4/7 appears in red, perform the following: Turn off thecamcorder and remove and reinsert the memory card. If 4/7 turns back to green you canresume recording/playback. If the problem persists, save your recordings (0 127) andinitialize the memory card (0 35).
