Canon Legria HFM31 Instruction Manual

Also see for LEGRIA HF M32: Instruction manual Product guide

Contents

Additional Information 151[Memory Info]: Displays a screen where you can verify how much of thebuilt-in memory ( only) or the memory card is currently in use(l total recording time and k total number of photos) and how muchspace remains available for recording.• Estimated figures about available movie recording time and availablenumber of photos are approximate and based on the recording modeand photo quality/size settings currently in use.• In the information screen of a memory card you can also check itsSpeed Class.• The [Total space] shown for the built-in memory indicatesactually usable space. It may be slightly smaller than the nominal built-inmemory capacity listed in the Specifications.[x.v.Colour]: Uses a color space with an extended gamut to achievedeeper colors, closer to real life.• Use this function to record video only when you intend to play back yourrecordings on an HDTV compatible with x.v.Colour, connected to thecamcorder using an HDMI cable. If recordings made with x.v.Colour areplayed back on a non-compatible TV, colors may not be reproducedcorrectly.[Auto Rotate]: Photos that were recorded in portrait orientation (by turningthe camcorder on its side), will be rotated automatically and displayedcorrectly during playback.[Photo Review Time]: Selects the time to display a photo after it has beenrecorded.• The review time can only be set when the drive mode is set to[A Single].[Photo Numbering]: Select the photo numbering method to be used on anew memory card. Photos are automatically assigned consecutive num-bers from 0101 to 9900, and stored in folders containing up to 100 pho-tos. Folders are numbered from 101 to 998.[a Reset]: Photo numbers will restart from 101-0101 every time youinsert a new memory card.[b Continuous]: Photo numbers will continue from the number followingthat of the last photo recorded with the camcorder.• If the memory card you insert already contains a photo with a largernumber, a new photo will be assigned a number one higher than that ofthe last photo on the memory card.• We recommend using the [b Continuous] setting.Downloaded From VideoCamera-Manual.com Manuals