Canon Legria HFM31 Instruction Manual

Also see for Legria hfm300: Instruction manual

Contents

Canon Legria HFM31 Instruction Manual Manual pdf 172 page image

172 Additional InformationAfter connecting the camcorder to a printer, the message [Busy] continues to appear on thescreen- Disconnect the USB cable and restore the connection after a short while.Photos are not correctly printed- You may not be able to print correctly, using a PictBridge-compatible printer, photos whosefile names have been changed or that were recorded, created, edited or changed usinganother device.Cannot save photos on my computer- When the memory contains too many photos (Windows – 2,500 photos or more, Macintosh –1,000 photos or more), you may not be able to transfer photos to a computer. Try using a cardreader to transfer the photos on the memory card. a only: To transfer the photos in thebuilt-in memory, copy them to the memory card in advance (0 122).The camcorder does not recognize the DW-100 DVD Burner even though it is connectedcorrectly.- 88 [USB Connection Type] is set to [Computer/Printer]. Set it to [DVD Burner] or to[Connect and Set].- Using the optional DW-100 DVD Burner, discs cannot be created from recordings on an SDXCmemory card. To create discs using the DW-100, make sure in advance that your recordingsare in the built-in memory or on an SD or SDHC memory card.- If you connect the optional DVD Burner while the index screen is showing the recordings onthe SDXC memory card, the DVD Burner may not operate correctly. In that case, disconnectthe USB cable and turn off the DVD Burner.List of MessagesFollowing the list of messages for the camcorder you can find separatelists for print-related messages (0 181) and for messages that appearonly when using the optional DW-100 DVD Burner (0 179).Accessing the memory card. Do not remove the memory card.- You opened the memory card slot cover while the camcorder was accessing the memory cardor the camcorder started accessing the memory card as you opened the memory card slotcover. Do not remove the memory card until this message disappears.AVCHD discs cannot include MXP scenes- AVCHD discs created with the optional DW-100 DVD Burner cannot contain scenes recordedin MXP mode. Select only those scenes recorded in other recording modes to create the disc(0 127).Back up recordings regularly- This message may appear when you turn on the camcorder. In the event of a malfunction,recordings may be lost so back up your recordings regularly.(in alphabetical order)