Canon M181011 User Manual

Also see for DR-4010C - imageFORMULA - Document Scanner: Brochure & specs Brochure & specs Brochure & specs Reference guide Easy start guide

Contents

24Other Methods for ScanningThis section describes the various scanning options.Changing the Feeding Option forScanningChanging the feeding option setting in the scanner settings dialog boxcan be helpful when scanning multipage documents.The following three feeding options are available:● [Standard Feeding]This is the standard feeding method. The scanning operation endswhen the documents placed in either scanner finish scanning.● [Panel-Feeding]When the documents placed in either scanner finish scanning, thescanner enters a standby state and waits for additional documentsto be placed. When you place additional documents and press theStart button, scanning continues.● [Automatic Feeding]When additional documents are placed after a document finishesfeeding, the scanner automatically detects these documents andcontinues scanning.This feeding option only applies to documents placed in the feederof the connected Canon DR-series scanner. Documents placed onthe flatbed are not detected automatically.Configuring the Feeding OptionThis section describes how to set [Feeding Option] to [Panel-Feeding].1 Open the scanner settings dialog box from yourapplication.When using CapturePerfect, for example, select [Scanner Setting]from the [Scan] menu. For details on how to open the settingsdialog box from other applications, refer to the operation manualof the application.2 Configure the [Main Scanner/Flatbed] setting.If the document is placed in the feeder of the connected CanonDR-series scanner, select [Main Scanner]. If you plan to switchbetween using the feeder and flatbed for scanning, select [Auto].