12En Choosing the Method to Connect theMachine to the Computer● Connecting via a Wired LAN(MF4890dw/MF4870dn/MF4780w Only)See “Connecting via a Wired LAN”You can connect the machine to the computer through awired router. Use the LAN cables to connect the machineto the wired router (access point).Make sure that there is an available port in the router toconnect the machine and the computer.Have a LAN Cable of Category 5 twisted-pair cable or higherready.● Connecting via a USB cableSee “Connecting via a USB Cable”You can connect the machine to the computer using aUSB cable.● Connection via a Wireless LAN (MF4890dw/MF4780w Only)See the Wireless LAN Setting Guide.You can connect the machine to the computer througha wireless router*. Since it is connected to wireless, noLAN cables are needed.* A wireless router (or access point), which supportsIEEE802.11b/g/n, is required.If you do not sure whether your router is wireless orwired:See the instruction manual provided with your networkdevice, or contact the manufacturer.Connecting via a Wired LAN(MF4890dw/MF4870dn/MF4780w Only)1 Connect the LAN cable.The IP address will be automatically configured in 2minutes. If you want to set the IP address manually, seethe following items.e-Manual “Network Settings” ▶ “Basic NetworkSettings” ▶ “Setting the IP Address”2 Install the driver and software using the UserSoftware CD-ROM.Proceed to “Setting a Paper Size and Type” (P.13).Connecting via a USB CableConnect the USB cable after installing the MF Drivers andthe MF Toolbox.1 Install the driver and software using the UserSoftware CD-ROM .2 Connect the USB cable.Proceed to “Setting a Paper Size and Type” (P.13).Downloaded from ManualsPrinter.com Manuals
