Canon MF7280 - ImageCLASS B/W Laser Copying Manual

Also see for MF7280 - ImageCLASS B/W Laser: Driver guide Brochure & specs Starter Guide Operation guide Quick start guide

Contents

Placing Originals1-221Introduction to CopyingIf any dirt on the original scanning area is detected when the originals are placedin the feeder, the following screen appears. Even though streaks may appear onthe copies, you can continue to scan your documents by pressing [Done].It is recommended, however, that you open the feeder, clean the scanning area,and then close the feeder. The following screen will not appear once thescanning area is clean.For instructions on cleaning the original scanning area, see Chapter 7, "RoutineMaintenance," in the Reference Guide.IMPORTANT• Do not add or remove originals while they are being scanned.• When scanning is complete, remove the originals from the original output area toavoid paper jams.NOTE• When you are enlarging an LTR or STMT original onto 11" x 17" or LGL paper,place the original horizontally.• The scanned originals are output to the original output area in the order that theyare fed into the feeder.• You can place different size originals together into the feeder if you set the DifferentSize Originals mode. (See "Different Size Originals," on p. 3-23.)• 11" x 17" and LGL originals must be placed horizontally.Original Output Area