Error Message Appears on PictBridge (Wireless LAN) CompliantDeviceThe following errors may occur when you print directly from a PictBridge (Wireless LAN) compliant device.Follow the instructions below to resolve them.Note• This section describes errors that appear on Canon-brand PictBridge (Wireless LAN) compliantdevices. The error messages and operations may vary depending on the device you are using. Forerrors on other brands of PictBridge (Wireless LAN) compliant devices, check the support code (errornumber) on the touch screen and take the appropriate action to clear the error.List of Support Code for Error• For the errors indicated on the PictBridge (Wireless LAN) compliant device and their solution, also referto the instruction manual of the device. For other device problems, contact the manufacturer.Error Message onPictBridge(Wireless LAN)Compliant DeviceWhat to Do"Printer in use" If the machine is printing from the computer or warming up, wait until it finishes.When it is ready, the machine starts automatically.If the machine is not printing from a computer or warming up, check the support code on thetouch screen and take the appropriate action to resolve the error.List of Support Code for Error"No paper" Load paper and select Continue* in the display of your PictBridge (Wireless LAN) compliantdevice.* Alternatively, load paper and tap OK on the touch screen of the machine to resume printing."Paper Error" If the paper output tray is not closed, check the support code on the touch screen and take theappropriate action to resolve the error.List of Support Code for Error"Paper jam" Select Stop in the display of your PictBridge (Wireless LAN) compliant device to stop printing.Remove the jammed paper, load new paper, tap OK on the touch screen, and try printingagain."Printer cover open" Close the operation panel on the machine."Waste tank full"/"Inkabsorber full"The ink absorber is nearly full.Check the support code on the touch screen and take the appropriate action to resolve theerror.List of Support Code for Error755
