Inserting the Memory CardImportantWhen a memory card is inserted into the card slot, the Access lamp is lit. When theAccess lamp is flashing, the machine is accessing the memory card. In this case, donot touch the area around the card slot.NoteWhen Read/write attribute is set to Writable from USB PC or Writable from LAN PC,you cannot print image data from the memory card or save scanned data on thememory card using the operation panel of the machine. After using the card slot as thememory card drive of a computer, remove the memory card, select Device usersettings in Device settings of Setup on the HOME screen, then set Read/writeattribute to Not writable from PC.Setting Up the Card Slot as the Memory Card Drive of the ComputerWhen you use a computer to edit or enhance photos saved on a memory card, be sureto print them from the computer. If you use the operation panel, the photos may not beprinted properly.1. Prepare your memory card.Attach a special card adapter if your memory card requires one.Before Inserting the Memory Card2. Turn on the power, then, holding both sides of the paper output tray,gently open it.3. Insert only one memory card into the card slot.The location to insert a memory card varies depending on each type of memory card.Insert your memory card straightforward WITH THE LABELED SIDE FACING TO THELEFT into the card slot, according to the insert location in the figure below.When the memory card is inserted properly, the Access lamp (A) will light up.168
