Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Setting Up theCard Slot as the Memory Card Drive of the ComputerSetting Up the Card Slot as the Memory Card Drive of theComputerThe Card Slot of the machine can also be used as the memory card drive of the computer.ImportantWhen Read/write attribute under Device settings is set to Writable from PC using the OperationPanel of the machine, you cannot print photos on a memory card using the Operation Panel of themachine. After using the Card Slot as the memory card drive of the computer, remove the memorycard, be sure to set Read/write attribute to Not writable from PC. When you turned off the machine,Writable from PC will be canceled and the setting is returned to Not writable from PC when you turnon the machine next time.1. Make sure that the memory card is not set.If the memory card is set, remove it from the Card Slot. For details, refer to Printing from a MemoryCard.2. Press the Menu button.3. Use the button to select Device settings, then press the OK button.4. Use the button to select Read/write attribute, then press the OK button.5. Specify the read/write attribute.Not writable from PCThe Card Slot is used only for reading. Be sure to select this mode when printing photos from amemory card.Writable from PCThe Card Slot is used as the memory card drive of the computer. Photo data can be written into thememory card.ImportantIf you use the Card Slot as the memory card drive of the computer, you need to perform a "saferemoval" operation on your computer before physically removing the memory card from yourmachine.In Windows, right-click the Removable Disk icon and click Eject. If Eject is not displayedon the screen, confirm that the Access lamp is not flashing and remove the memory card.On a Macintosh, drag the Mount drive icon into the Trash.Page topPage 330 of 726 pagesSetting Up the Card Slot as the Memory Card Drive of the Computer
