Canon MP830 - PIXMA Color Inkjet Service Manual

Also see for PIXMA MP830: Supplementary guide Start here User guide Quick start guide Quick start guide

Contents

2. LIST OF ERROR DISPLAY / INDICATIONErrors and warnings are displayed by the following ways:1) Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the LCD in text and by icon.2) Warnings during printing from a computer are displayed on the printer driver Status Monitor.3) Error codes are printed in the "operator call/service call error record" area in EEPROM information print.Buttons valid when an operator call error occurs:1) ON/OFF button: To turn the machine off and on again.2) OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared when the cause of the erroris eliminated, and pressing the OK button may not be necessary.3) Stop/Reset button: To cancel the job at error occurrence, and to clear the error.2-1. Operator Call Errors (by Alarm LED Lit in Orange)Error Error code Message on the LCD SolutionNo paper (ASF). [1000] Auto sheet feeder.There is no paper. Load paper and press [OK].Set the paper in the ASF, and press the OKbutton.No CD / DVD tray *1. [1001] There is no CD-R tray. Attach the tray and press[OK].Set the CD / DVD tray, and press the OKbutton.No paper in the front paperfeed cassette.[1003] Cassette.There is no paper. Load paper and press [OK].Set the paper in the cassette, and press the OKbutton.No CD or DVD *1 . [1002] Printable disc is not set. Correctly place a disc in theCD-R tray and press [OK].Set a CD or DVD in the CD / DVD tray(which is ejected at error occurrence), andinset the CD / DVD tray in the properposition. Then, press the OK button.Paper jam. [1300] The paper is jammed. Clear the paper and press[OK].Remove the jammed paper, and press the OKbutton.Paper jam in the rear guide. [1303]Paper jam in the underguide.[1304]No ink. [1600] Ink has run out. Replace the ink tank and close thecover. (U041)Replace the empty ink tank(s), and close thecover.Pressing the OK button will clear the errorwithout ink tank replacement, however, inkmay run out during printing.Ink tank not installed. [1660] The following ink tank cannot be recognized.(Applicable ink tank icon) (U043)Install the applicable ink tank(s) properly, andconfirm that the LED's of all the ink tankslight red.The print head is notinstalled, or it is notproperly installed.[1401] Print head is not installed. Install the print head.(U051)Install the print head properly.Print head temperaturesensor error[1403] The type of print head is incorrect. Install the correctprint head.Re-set the print head. If the error is notcleared, the print head may be defective.Replace the print head.Faulty EEPROM data of theprint head[1405]Inner cover open beforestart of printing on paper(print continuable). *2[1841] Inner cover is open. Close the inner cover and press[OK].Close the inner cover, and press the OKbutton.Inner cover open duringprinting on paper (printNOT continuable). *2[1846] Close the inner cover, and press the OKbutton to clear the error. The paper beingprinted at error occurrence will be ejectedwithout printing the remaining data for theejected paper, then printing will resume fromthe next page.Inner cover open beforestart of printing on paper(print continuable). *1[1851] Close the inner cover, and press the OKbutton.Inner cover open duringprinting on paper (print[1856] Close the inner cover, and press the OKbutton to clear the error. The paper being1-4