73EEditingConverting Analog Signals into DigitalSignals (Analog-Digital Converter)By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analogvideo/audio signals to digital signals and output the digital signals via the DV terminal.The DV terminal serves as output terminal only.Connecting the DevicesTurn off all devices before starting the connections. Unload the tape from the camcorder.Refer also to the instruction manual of the connected device. Use the optional CV-150F(4 pin-4 pin) or CV-250F (4 pin-6 pin) DV Cable.Turning On the Analog-Digital ConverterOpen the menu and select [VCR SETUP]. Select [AV DV], set it to [ON]and close the menu.CAMERA PLAY (VCR)MENU( 34) VCR SETUP AV DV•••••••• OFFAUDIOVIDEORLSignal flowDV cable (optional)Signal flowSTV-250N Stereo VideoCable (supplied)
