102Audio DubbingYou can add sound on a tape with the built-in microphone. With the MVX1Si you can alsoadd sound from external audio devices.This function is operated with the wireless controller.Connecting an Audio DeviceRefer also to the instruction manual of the connected device.DubbingAvailable only in the mode.1. Load a recorded cassette.Use a tape recorded in SP, 12-bit mode with this camcorder.2. Press the MENU button and select [AUDIO SETUP]. Select[AUDIO DUB.], set it to [AUDIO IN] or [MIC. IN] and press the MENU button.3. Locate the scene you wish to start audio dubbing.4. Press the PAUSE button on the wireless controller.5. Press the AUDIO DUB. button on the wireless controller.“AUDIO DUB.” and “ ” appear.6. P ress the PAUSE button on the wireless controller to begin dubbing.• Microphone: Speak into the microphone.• Audio device: Begin playback.7. Press the STOP button on the wireless controller to stop dubbing.Audio device: Stop playback. Audio dubbing will stop if the tape has a blank section or a section recorded inLP mode or 16-bit mode. You cannot use the DV terminal for audio dubbing. If you add sound to a tape not recorded with this camcorder, sound quality maydecrease.MENU( 62) AUDIO SETUP AUDIO DUB. AUDIO INAUDIORRL Signal flowMTC-100 Multi Cable (supplied)Audio device (e.g.CD player)OUTPUT
