Canon MVX1i Instruction Manual

Also see for MVX 1i: Instruction manual

129ETrouble?List of MessagesMemory Card Related MessagesMessage ExplanationSET THE TIME ZONE,DATE AND TIMEYou have not set the time zone, date and time. This messageappears each time you turn the power on until you set the timezone, date and time.23CHANGE THE BATTERYPACKBattery pack is exhausted. Replace or charge the battery pack. 14THE TAPE IS SET FORERASURE PREVENTIONCassette is protected. Replace the cassette or change theposition of the protect switch.133REMOVE THECASSETTECamcorder stopped operating to protect the tape. Unload andreload the cassette.17CHECK THE INPUT DV cable or USB cable is not connected, or the connected digitaldevice is turned off.97120CONDENSATION HASBEEN DETECTEDCondensation has been detected in the camcorder. 128CONDENSATION HASBEEN DETECTEDREMOVE THECASSETTECondensation has been detected in the camcorder. Unload thecassette.128TAPE END Tape reached the end. Rewind the tape or replace the cassette. –CHECK THE CASSETTE[WRONG FORMAT]You attempted to perform audio dubbing on a tape recorded inHDV format.–WRONG FORMATPLAYBACK NOTPOSSIBLEYou attempted to play back a tape recorded in HDV format. –CHECK THE CASSETTE[REC MODE]You attempted to perform audio dubbing on a tape recorded in amode other than the SP mode.102CHECK THE CASSETTE[AUDIO MODE]You attempted to perform audio dubbing on a tape recorded in 16-bit or 12-bit 4-channel sound.102CHECK THE CASSETTE[BLANK]You attempted to perform audio dubbing on a tape with a blanksection.102HEADS DIRTY, USECLEANING CASSETTEVideo heads are dirty. Clean the video heads. 136COPYRIGHT PROTECTEDPLAYBACK IS RESTRICTEDYou attempted to play back a copyright protected tape. 99COPYRIGHTPROTECTED DUBBINGRESTRICTEDYou attempted to dub a copyright protected tape. May also appearwhen an anomalous signal is received during analog line-inrecording.99Message ExplanationNO CARD Memory card not is inserted into the camcorder. 18NO IMAGES No images are recorded on the memory card. –CARD ERROR A memory card error occurred. The camcorder cannot record orplay back the image.The error may be temporary. If the message disappears after 4seconds an “ ” flashes red, turn the camcorder off, remove thecard and reinsert the card. If “ ” changes to green, you cancontinue recording/playback.–CARD FULL No remaining capacity on the memory card. Replace with anothercard or erase images.–NAMING ERROR The folder and file numbers have reached their maximum value. –