1202. Turn on the printer.3. Set the camcorder to CARD PLAY mode.4. Connect the camcorder to the printer using the cable.• appears and changes to , or when the printer is properlyconnected to the camcorder. (Does not appear with movies, or still images thatcannot be played back with the camcorder.)• The (print/share) button lights up and the current print setting will be displayedfor approx. 6 seconds. If continues to flash (for more than 1 minute) or if , ordoes not appear, the camcorder is not correctly connected to the printer. In suchcase, disconnect the cable from camcorder and printer, turn off camcorder andprinter, turn both back on and reconnect the camcorder to the printer. Do not connect the camcorder to a printer when the camcorder is set to a modeother than the CARD PLAY mode. Refer to the instruction manual of each printer for information on which interfacecable to use with the camcorder.The Canon CP-Printers CP-10 and CP-100 are supplied with two directinterface cables. Use the cable with the USB logo on the connector (DIF-100). We recommend powering the camcorder from a household power source. Refer also to the instruction manual of the respective printer. The print setting menu may differ slightly depending on the connected printer.Printing with the (Print/Share) ButtonYou can print an image without changing the settings by simply pressing the (print/share) button.1. Select the still image you wish to print with theCARD +/– button.2. Press the (print/share) button.• Printing starts. The button flashes and glows steadilywhen printing is complete.• If you wish to continue printing, select another still image withthe CARD +/– button.CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
