Auto print settings• Received documentsSelects whether to print the received fax automatically when receiving a fax.If you select Do not print, the received fax is stored in the machine's memory.For details on the received fax stored in the machine's memory:Document Stored in Machine's Memory• Activity reportSelects whether to print ACTIVITY REPORT automatically.If you select Print, the machine prints ACTIVITY REPORT for the 20 histories of sent and receivedfaxes automatically.For details on the procedure to print ACTIVITY REPORT manually:Summary of Reports and Lists• TX reportSelects whether to print TX REPORT/ERROR TX REPORT automatically after sending a fax.If you print the report, select Print error only or Print for each TX.If you select Print error only or Print for each TX, you can specify the print setting that the first pageof the fax is printed along with the report.• RX reportSelects whether to print RX REPORT automatically after receiving a fax.If you print RX REPORT, select Print error only or Print for each RX.• Print when no inkSets whether to continue printing the received fax without storing it in the machine's memory when theink has run out.However, part or all of the fax may not be printed since the ink has run out.Auto save settingSelects whether to save the received fax on the USB flash drive automatically after receiving a fax.Saving Received Faxes Automatically on a USB Flash DriveSecurity control• FAX no. re-entryIf you select ON, you can set the machine to send faxes after using the Numeric buttons to enter thenumber twice. By using this setting, you can avoid the mistransmission of faxes.• Check RX FAX infoIf you select ON, the machine checks whether the recipient's fax machine information matches thedialed number. If it matches the number, the machine starts to send faxes.Preventing Mistransmission of Faxes• On-hook settingIf you select Enable, you can use the on hook function.• FAX RX rejectIf you select ON, the machine rejects the reception of faxes with no sender information or faxes fromspecific senders.Rejecting Fax Reception• Caller rejectionIf you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's IDmatches the condition specified in this setting, the machine rejects the phone call or fax reception fromthe sender.
