LCD and Operation PanelYou can use the machine to make copies, send/receive faxes, scan originals, or print photos on a USBflash drive without a computer.You can also make good use of the various functions of the machine using the menu screen and thesettings screen on the LCD.The copy, scan, or fax mode can be selected.The desired mode can be selected by pressing the mode button (A) on the operation panel.On each mode screen, the various functions can be selected or the setting can be changed, with theFunction buttons (B) or the , , , and buttons (C).Pressing the MENU button (D) displays the menu which provides access to photo print or various copyfunctions. With this menu, you can perform machine maintenance and change machine settings.On the menu screen or settings screen, use the , , , and button to select an item or option, thenpress the OK button (E) to proceed with the procedure.To return to the previous screen, press the Back button (F).The lamp on the selected mode button or MENU button will light up.Using the Function ButtonsFunction menus (G) will appear where required at the bottom of the screen. Pressing a correspondingFunction button (H), (I), or (J) displays its function, such as a settings screen.The number of function menus and their contents vary depending on the screen. Check the function menusdisplayed at the bottom of the screen, then select the one desired.Example: Fax standby screen(H) Press the left Function button to select Function list. The fax menu screen will appear.
