Canon MX530 Setting Up

Also see for MX470: User manual Getting started User guide Manual Online manual

XXXXXXXX © CANON INC. 2014繁體中文ENGLISHSetting Up the FAXPress the button to display the Setup menu.Use the [] button to select Fax settings, then press the OK button.Use the [] button to select Easy setup, then press the OK button.Use the [] button to select Start setup, then press the OK button.Easy setup starts up.Follow the on-screen instruction to complete the settings in accordance with theoperating environment.11223344Starting Easy setupWhen "Connect your TEL line system to the device's LINE jack" is displayedWhen a message to prompt connection of a telephone or an answering machine is displayedWhen "Select line type" is displayedRead this manual after finishing the operation of Getting Started.To use the fax features of the machine, you can enter the fax settings through the Easy setup.When "Telephone line type" is displayedConnect the machine to a telephone jack with the supplied telephone line cable,then press the OK button.A basic connection method is shown in this figure. For other connectionmethods, refer to the Online Manual.Users in Europe: If you prepare your own telephone line cable, be sure it is a6-wire telephone line cable.••When "Ans. machine on tel." is displayed (in case fax and telephone are on the same line)If you want to connect a telephone or an answering machine, remove the Cap,connect a telephone or an answering machine with a telephone line cable andpress the OK button.If you do not want to connect a telephone or an answering machine, just pressthe OK button.Do not use a telephone jack line duplexer.Users in the UK: Use a B.T. adapter for connection as required.••If you want to connect to:the telephone jack on the wall directlya PBX extension line or an xDSL splitterUse the [] button to select Telephone line, then press the OK button.••If you want to connect to:an internet telephonean xDSL modeman ISDN lineUse the [] button to select IP telephone line, then press the OK button.•••About the Receive ModeYou can select Touch tone or Rotary pulse.Use the [] button to select your Telephone line type, then press the OK button.Connecting the Telephone LineIf you want to use an answering machine,Use the [] button to select Use, then press the OK button.If you do not want to use an answering machine,Use the [] button to select Do not use, then press the OK button.After finishing Easy setup, enter the Setup menu again and make other settings.Entering the FAX User SettingsPress the button to display the Setup menu.Use the [] button to select Fax settings, then press the OK button.Use the [] button to select FAX user settings, then press the OK button.Use the [] button to select Unit TEL no. registr., then press the OK button.Use the Numeric buttons to enter the sender fax number, then press the OK button.Use the [] button to select Unit name registr., then press the OK button.Use the Numeric buttons to enter the sender name, then press the OK button.11223344556677Selecting the Receive ModeYou can select the receive mode suitable for your fax use conditions.DRPD is available only in the US and Canada.Network switch may not be available depending on the region or country.The telephone may not ring when a call incomes depending on the type or settings of the external telephone.•••Press the button.Press the Menu button.Use the [] button to select Receive mode set., then press the OK button.Use the [] button to select the receive mode you want to set, then press the OK button.The confirmation screen asking whether to make advanced settings is displayed.If you select Yes and press the OK button, you can specify the advanced settings of each receive mode.Advanced setting in TEL priority modeManual/auto switchThe machine automatically receives faxes after the external device rings a specified length of time. You can specify the length of time.User-friendly RXThe machine switches fax reception automatically after the answering machine connected to the machine answers.Advanced setting in DRPDDRPD: FAX ring pat.Specify the ring pattern to match the DRPD service pattern assigned by your telephone company.Incoming ringYou can specify the number of times the external device rings when incoming.Advanced setting in Network switchIncoming ringYou can specify the number of times the external device rings when incoming.Advanced setting in Fax only modeIncoming ringYou can specify the number of times the external device rings when incoming.••••••11223344Setting the Receive ModeReceive mode Your fax use condition Receiving operationTEL priority mode When using a telephone and a fax with the sametelephone number:When a call incomes and the connected telephone rings, pick up thehandset.If the call is a voice call, talk on the telephone.If the call is a fax, hang up the handset after the machine starts receivingthe fax.DRPD or Network switch When using a fax with the telephone numbersubscribing to a ring pattern detection service:When a call incomes, the machine detects whether the call is a fax call. Ifthe call is a fax, the machine will receive the fax automatically.If the machine does not detect the fax ring pattern, the telephone willcontinue ringing. Answer the telephone.Fax only mode When using the machine for a telephone number forfax only:When a fax incomes, the machine will receive the fax automatically.For details on the sender information and receive mode, and setting the date/time, refer to the Online Manual.12QT5-6697-V01 PRINTED IN XXXXXXXX

/ 2

Related manuals for Canon MX470